Amplifiers

The MPA 101 is a compact, high-quality amplifier for multiple purposes. The amplifier can be set to operate in full range mode to power regular speakers or set in an adjustable low-pass mode to power passive subwoofers.

The MPA 201 is a compact, high-quality amplifier for multiple purposes. The amplifier can be set to operate in full range mode to power regular speakers or set in an adjustable low-pass mode to power passive subwoofers.

120 Watt amplifier engineered with unique features to assist the contractor or installer in today’s commercial business audio environment.

The Atlas Sound AA35, a 3 input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, small to medium speech privacy systems and in applications where music on hold (MOH) plus paging is required.

Line 1 / Line 2 priority input switching, Line 2 auxiliary output, Speaker A/B switching, Front panel Balance and Volume controls, Signal sensing “Power On”.

Line 1 / Line 2 priority input switching, Line 2 auxiliary output, Speaker A/B switching, Front panel balance and volume controls, Front panel diagnostic LEDs, Signal sensing “Power On”, 12VDC “Trigger On”, Rack-mount ready

Line 1 / Line 2 priority input switching, Line 2 auxiliary output, Speaker A/B switching, Front panel balance and volume controls, Front panel diagnostic LEDs, Signal sensing “Power On”, 12VDC “Trigger On”, Rack-mount ready

Line 1 / Line 2 priority input switching, Line 2 auxiliary output, High level input, Speaker A/B switching, Front panel balance and volume trim controls, Independent rear left / right master level controls, Front panel diagnostic LEDs, Signal sensing “Power On”, 12VDC “Trigger On”, Triple-Darlington Power Amplifier Stages, Dual-differential error amplifiers

Line 1 / Line 2 priority input switching, Line 2 auxiliary output, High level input, Speaker A/B switching, Front panel balance and volume trim controls, Independent rear left / right master level controls, Front panel diagnostic LEDs, Signal sensing “Power On”, 12VDC “Trigger On”, Triple-Darlington Power Amplifier Stages, Dual-differential error amplifiers, SN Ratio: 100dBA, Rack-mount ready

The MPA 101 is a compact, high-quality amplifier for multiple purposes. The amplifier can be set to operate in full range mode to power regular speakers or set in an adjustable low-pass mode to power passive subwoofers.

The MPA 201 is a compact, high-quality amplifier for multiple purposes. The amplifier can be set to operate in full range mode to power regular speakers or set in an adjustable low-pass mode to power passive subwoofers.

Inputs : 12 Gold RCA jacks with adjustable gain. Input impedance : 50k ohms. Outputs : detachable 4 position plugs (fits 12 g wire). Output power : 50 watts RMS per channel (8 ohms). Peak output power : 100 watts per channel (8 ohms). Ideal impedance : 4 - 8 ohms. Frequency response : 10 Hz - 40 kHz +/- 1dB (1w). S/N ratio : over 105 dB A weighted (50 watts). THD distortion : less than 0.1% 20 Hz to 20 kHz. IMD distortion : less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE). Fan Noise : quiet 26 dBA. Power : 750 watts at 117 VAC or 230VAC

Inputs : 8 Gold RCA jacks with adjustable gain. Input impedance : 50k ohms. Outputs : detachable 4 position plugs (fits 12 g wire). Output power : 50 watts RMS per channel (8 ohms). Peak output power : 100 watts per channel (8 ohms). Ideal impedance : 4 - 8 ohms. Frequency response : 10 Hz - 40 kHz +/- 1dB (1w). S/N ratio : over 105 dB A weighted (50 watts). THD distortion : less than 0.1% 20 Hz to 20 kHz. IMD distortion : less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE). Trigger control : 12 VDC 35mA on 3.5mm mono jack. Fan Noise : quiet 26 dBA

Boost the amplification of your Simplese  or Essentia  whole-house audio system with NUVO's compact 200-Watt Amplifier. This amplifier offers two channels of clean, pure sound, and integrates features of typically much more expensive and complex amplifiers. High-efficiency technology allows it to run significantly cooler than other analog amplifiers and requires less operating power. So placing it in a rack with your expensive and sensitive audiovisual equipment does not pose a heat risk. Plus its compact, half-rack size allows it to fit easily on top of the Simplese, or fit two units side-by-side on top of the Essentia.

The NV-LSA40A is a 40 watt, local source input designed to fit into a standard single gang box. It amplifies a local audio source (i.e. CD player, iPod, or MP3 player) and plays it through an individual zone. Compatible with all NuVo audio distribution systems.

The NuVo Local Source Amplifier provides local zone amplification for any audio source. Optional NuVo keypad easily controls the amplifier, issuing commands to turn ":On": or automatically switch to the local audio source when turned ":Off":. For maximum enjoyment, try it with the Power Distribution Hub; it powers up to 4 individual Local Source Amplifiers throughout the home.

Selectable channel modes, 6 stereo channels at 35W per channel, 3 stereo channels at 80W per channel in bridged mode, 4 stereo channels at 35W per channel, 1 stereo channel (bridged) at 80W per channel, built-in digital level control, infrared controlled level/balance/mute for each channel pair, local or common buss, IR and DC voltage controlled, low impedance capability, auto protection, 5"H x 19"W x 15"D.

Play any available network music content. Support music stored on USB flash drives. Alarm clock feature. Control buttons on top for easy access. Subwoofer output for added bass. iPod/Bluetooth compatibility via optional accessories. Built-in amplifier